-
برای بزرگنمای عکسهای زیر بر روی اسامی چراغها کلیک نمایید
نمونه پرژکتورهای بیرونی و داخل آبی مهتاب
 |
 |
|
|
Suitable for outdoor
Washer Light IP65
|
با استفاده از تکنولوژی نور پردازی روز دنیا High Power LED 12Vکامل ترین و متنوع ترین پرژکتورهای زیرآبی با لامپ های جدید نور دهی بسیار قوی . مصرف کم انرژی .تعویض وترکیب رنگها . عمرطولانی لامپهاقابلیت کنترل رنگها . برای آبنماهای موزیکال طبق سفارش چراغها در سایز و مدلهای مختلف وتعداد ال ای داخل چراغ طبق سفارش از 1 عدد تا 150 عددبالامپ های پاور 1وات و 3 وات و 5 وات - لنزهای با درجه تابش مختلف طبق سفارش دارای یکسال ضمانت لامپها و مدارها و چراغ
-
پرژکتورهای پاور ال ای دی - برای نور پردازی اماکن / ستونها .نمای ساختمان . روشنایی پارکها و غیره در رنگهای . سفید .قرمز .سبز. آبی . و آر جی بی
|
|
|
Now you can change the white bulb in your pool light with our new Smart LED Colour changing Bulbs. Two models available: one program LED bulb and 16 programs LED bulb. Features:
Long Life - 100.000 hours lifetime.
12 Volts Low voltage - For added safety
15 to 30 Watts energy - save energy
International Standard - PAR56
چراغهاي دفني جهت استفاده در پاركها در زير درخت و دركف معابر
موارد مصرف : محوطه های وسیع پارکینگ ها، محل های عبور و مرور عمومی . پاركها زير درختان منا طق مسکونی: مسیر های عبور و مرور، اماکن خصوصی، مناطق مسکونی، پیاده روهاو ایستگاه ها درمدل و اندازههاي مختلف قابل كاركرد با لامپهاي متال هاليد .كم مصرف .هالوژني و ...غيره ip55
 |
 |
 |
GU10
|
-
|
-
چراغهای دفنی بالامپ
-
کم مصرف |
چراغ دفنی
-
LED & POWER LED |
-
-
- LA 1000-36
|
-
در هنگام خرید به نکات زیر توجه فرمایید
چراغهای نامناسب برای استفاده در آبنما و استخر
بدلیل شباهت بین چراغهای زیرآبی و چراغهای دفنی و چمنی ازاین چراغها در بعضی موارد مشاهده شده که درزیر آب استفاده شده است
این دسته از چراغها بدیل طراحی و نوع کاربری ونوع مواد تولیدی در بدنه و اورینگها فقط واترپروف میباشد . که دربرابر ریزش آب مقاوم بوده
که با رزین و انواع چسب آببندی نمی شود . Ipپایین بودن
قابلیت کارکرد در زیرآب را به هیچ عنوان ندارد
عرضه انواع نوار های آپارات جهت مفصل با مارکهای مختلف
عرضه انواع سر فواره های برنجی وآلومینیومی در سایز ومدلهای مختلف
برخی از نمونه سر فواره ها
پمپ هاي آبنما : حد اکثر ارتفاع فواران 3 متر/ داراي دو نازل مدل سه طبقه و چتري دارای شیر تنظیم ارتفاع آب مصرف در : آبنماهاي کوچک خانگي بدون نياز به لوله كشي / فقط كافيست پمپ را در آب قرار دهيد پمپ توسط بادكشهاي كه در كف آن قرار دارد محكم به كف حوضچه آبنما متصل مي گردد و به برق وصل نماييدچراغ قابل نصب : هالوژن روكار
A well-designed pond can be one of the most enriching aspects of your outdoor landscaping project. There is nothing like the sound of bubbling water, or the shimmering appearance of a still aqueous surface, to convey the ambiance of tranquility and relaxation that is so vital to your home’s outdoor spaces A carefully selected underwater lighting system can dramatically enhance that effect, illuminating certain details by day and bringing the entire creation to life by night. Water and light, joined together, produce a pleasing synthesis. The calming effects of an artfully designed underwater lighting system will supply your home with a cathartic pleasure to be enjoyed by both your family and guests for many years to come. Our underwater lighting pond fixtures can turn your nighttime pond into a dancing visual display of light and shadows!
On the other hand, the combination of water and electricity is nothing to take lightly! We understand this concern, which is why we provide reliable underwater lighting fixtures with all the equipment you will need to install them safely. If you are a beginner, we recommend our low voltage (12 volts) underwater light fixtures, which should be installed in conjunction with one of our outdoor low voltage transformer products. If you are a more experienced technician, we have house current (120 V) underwater lighting fixtures as well, which require a ground fault current interrupter (GFCI) to be installed properly.
Once you have chosen the level of voltage for your underwater lighting system, you will need to make a number of decisions about which of our products will be best suited to your project. For example, we have brass underwater lighting fixtures, fiberglass, copper, as well as a specially molded Ryton composite material. Please be aware that you should NOT use copper underwater light fixtures if you are illuminating water that contains fish, since the metal reacts with the water to produce a chemical that could be toxic to them. Other considerations are of a more aesthetic nature. These may depend on the size of the area you wish to illuminate, or whether there are particular aspects of your creation you wish to highlight with your underwater lighting. We have flood lights that will illuminate a larger area, as well as spot lights that will draw attention to a particular facet of your project, such as a certain plant or underwater artistic piece. We have underwater low voltage lighting kits that point straight up, as well as others fitted with angle brackets that allow for unlimited adjustment. For greater control of the light, we offer glare shields that can be fitted with most fixtures.
There are 3 main conditions that will modify or change your beam spread as well as light intensity. Depth, Clarity, and Movement:
Depth: the deeper the water, the more the light will widen or spread. Not recommended for applications deeper than 4 feet. the impact or effects will be greatly sacrificed or reduced.
Clarity: clean or clear water will produce maximum quantity of light. Dirty water will reduce the light dramatically. The dirtier the water, the more wattage or tighter beam spread will be needed to see the impact of the light source and its effect.
Movement: water movement will distort or increase the beam spread. the top of the water acts as the lens. Clear lens or no movement, the beam will remain more true or accurate. The more movement, the larger increase in spread, not to mention constant light movement.
When you install your underwater lighting fixtures, you should make sure not to fasten the light cover too tightly. This is a common mistake made by amateur installers, who wish to make certain no water will leak into the fixture. In fact this does more harm than good, as the gasket seals expand when heated by the light, and this expansion may actually create a leak if the cover is fastened too tightly. So tighten the cover securely, but do not overdo it.
